uniform cooling
英 [ˈjuːnɪfɔːm ˈkuːlɪŋ]
美 [ˈjuːnɪfɔːrm ˈkuːlɪŋ]
均匀冷却
双语例句
- This reduces the knife dish load, and improve efficiency, and grinding can make powder get uniform cooling.
这样减少了刀盘负荷，提高磨粉效率，又能使粉料得到均匀冷却。 - The porous type air-out equipped can fully reach every corner of the cabinet to ensure the uniform cooling of items and the better refrigeration effect.
微孔式出风，充分到达柜内每一个角落，保证物品受冷均匀，冷藏效果更佳。 - The design of air-cooling provides rapid and uniform cooling to keep the fresh taste of food.
风冷设计，制冷快速均匀，保持食品新鲜口感。 - Compared to the channel with uniform section area, those with various section areas are much similar to the internal cooling structure of the turbine blade.
与等截面回转通道相比较，变截面通道更接近叶片内冷通道原型。 - Uniform pumping and uniform cooling are key techniques to reduce thermo-optical distortion and to achieve high beam quality output for solid-state laser.
均匀抽运及均匀冷却是激光二极管抽运激光器减小热致光学畸变以实现高光束质量输出的核心技术难题。 - The wall temperature distribution becomes more uniform when the ratio of the wall thickness to the hole diameter increases, and the cooling efficiency will decrease at the same time.
而减小单位面积开孔率对于壁温分布的影响较小，同时冷却效率也会降低。 - The novel rotary spreader ensures materials for a uniform and complete cooling with reduced breakage, featuring adjustable range of material distribution and lowered power consumption;
新型旋转撒料器保证了物料得到充分均匀、透彻的冷却并可明显减少破碎率，布料范围可调，动力消耗较小； - In view of the phenomena that uniform spray cooling brings about uneven deformation when quenching medium steel plates, the non uniform jet compensation technique was presented.
针对中厚板淬火过程中均匀喷水时造成钢板变形的现象，提出了非均匀喷水的补偿方法。 - Component design and casting techniques must ensure that metal composition and structures remain uniform throughout and that cooling rates are evenly distributed.
部件设计与铸造技术必须保证金属成分与结构始终保持均匀、冷却率均匀分布。 - Since plate bundles of plate heat exchangers were designated vertically, while the medium enters plate bundles, the uniform level has an important influence on cooling efficiency.
由于板式空冷器的板束为垂直设计，因此，介质进入板束时的均布水平对于空冷器的冷却效率有着重要的影响。 - It is found that the more uniform temperature distribution could be acquired by strengthening the cooling in the fillet part of the H-beam in the controlled cooling process.
结果表明：在轧后控制冷却过程中，若冷却水集中从H型钢腿部外侧对其腰腿接合处进行快速冷却可获得较均匀的温度分布。 - By comparison different temperature field which are affected by the lay-out of cooling section, this paper uncovers the importance of uniform cooling when design cooling section of calibrator.
并通过不同冷却流道所影响的型坯温度场的比较，揭示了整体均匀冷却在定型模冷却系统设计中的重要意义。 - According to the idea of uniform cooling in secondary cooling zone, the spraying cooling structure and the disposal of nozzles are redesigned and optimized, and one spraying cooling zone is increased.
依据二冷均匀冷却的思想，重新设计并优化了二冷喷淋结构和喷嘴的布置，增加了一个二冷喷淋段。 - The system should ensure rapid and uniform cooling.
模具的冷却系统应该保证迅速和均匀的冷却。 - From the examined microstructure and the calculated result of temperature field, it was suggested that in order to get the uniform properties the controlled cooling should be used.
轧件断面的组织形态和空冷温度场计算结果表明，为了改善轧件的断面性能，应在轧件的不同部位选择不同的冷却强度对其进行轧后的控制冷却。 - The rapid cooling increases the productivity, while the uniform cooling improves plastic product quality.
迅速冷却提高了生产效率，而均匀冷却改善了塑件质量。 - The uniform cooling system has been successfully used in the practical motor driving system.
这种一体化的冷却系统已在实际电机驱动系统中得到了成功的应用。 - Uniform Cooling System of Motor and Its Controller Used in Electric Vehicles
用于电动汽车的电机和驱动器一体化冷却系统 - The reasonable arrangement of the nozzle can ensure the slab surface temperature uniform cooling in the direction of casting.
对二冷喷嘴的布置进行设计，保证铸坯表面温度在拉坯方向上均匀冷却。 - In order to improve material flow, prompting the tooth part of the material of the uniform flow, this paper also use the principle of local cooling control to the corresponding numerical simulation.
为改善材料流动，促使齿形部分材料均匀流动，本文还运用局部降温控制的原理来进行相应的数值模拟。 - Mixed discharging type cooling system which uses cavity-type channels and cooperation of shores for spoiler can effectively achieve uniform and rapid cooling formed parts.
混排式冷却系统采用型腔式水道、配合支撑柱进行扰流，可以有效的实现对成形件的快速均匀冷却。 - On the other hand, the configuration of quenching set can be evaluated and guided based on simulation so as to get uniform flow and cooling effect.
反过来，根据模拟计算的流场与温度场分布情况，可以评价并指导淬火装置的结构设计，以获得均匀的流动和冷却效果。 - By flexible arrangement of the cooling devices uniform cooling can be achieved.
通过该装置灵活的位置布置实现试样的均匀冷却。 - Therefore, the reasonable structure design and caster spray water control can ensure uniform cooling slab, in order to ensure the quality of the slab internal and external.
因此，对连铸机结构的合理设计和喷淋水装置的优化控制能够实现铸坯的均匀冷却，从而保证铸坯的内部和外部的质量。 - Therefore, in order to guarantee that the shield blanket has uniform and sufficient cooling effect, it is very necessary to carry out the hydraulic analysis of the rationality of the shield blanket structure.
因此，为了保证屏蔽包层能够得到均匀和充分的冷却，对屏蔽包层结构的合理性进行热工水力分析是十分必要的。